Panic Alarm Monitoring Project

In a widely distributed, restricted and noisy areas like a shipyard, it is difficult for a normal person to shout loud in order to alert or warn shipyard personnel from any hazard or unusual occurrences for e.g. Fire, Flood and Accidents.

These occurrences may seriously threaten the life of the personnel working in such working environment if they are not made known quickly to all the personnel at sites as well as to the key safety committee members for planning and implement immediate rescue measures. Under such case, there is a need for an effective panic button alarm system that gives both the visual impact especially during the night and audio impact especially during the day.

While traditional dialup monitoring alarm system may be also feasible in areas like workshops, it is impossible to be implemented on the ships under repair due to lack of fixed telephone lines. Different ships may be under repair at different times and it is not easy to implement a fixed wired type of monitoring system.

TMAS GSM Panic / Emergency Alarm Box is customized built with the use of TMN-50 for such panic / emergency alarm monitoring purpose and to address the above issues. To last longer under semi outdoor condition, it consists of various water proofing parts like the rugged enclosure, 107db siren, strobe light, panic buttons for Fire, Flood and Accident Indicators as well as the IP67 rated industrial power socket. Since it just need the AC point to operate, it can be easily deployed at any shipyard location with power point.

Upon any press of the three panic buttons, TMN-50 will quickly sent out predefined SMS alerts to the safety officers. If a particular safety officer did not SMS acknowledge back to the TMN-50, the alert can be resent again based on resend times and intervals. If there is no acknowledgement by the safety officers after the resend period, the alert can be escalated to the next higher safety committee members and so forth. With the triggering of TMN-50 input, it can also set to uses the output of TMN-50 to trigger both the siren and the strobe light so as to attract attention and nearby help.

A better alarm means and faster response time may save precious lives and also improves the work safety standard of an organization.

 
panic-alarm-monitoring-proj.jpg f.jpg
Panic Alarm Monitoring at Shipyard
 

 

 

In the case where there is a need to have the safety officers to have a means of activate the TMAS GSM panic alarm box without physically press on the panic buttons of the alarm box, water proof and battery operated wireless pendant and wristband can be bundled into this solution. This may be particularly true if the users are inside the base engine rooms while the GSM alarm box is deployed on top main deck. Such battery powered pendant / wristband can last for more than 3 years without any maintenance.

 

Each GSM panic alarm box with built in wireless receiver can be configured to support 10 wireless pendant or wristband and it has an operating distance of max 150m in open space and shorter distance. Upon pressing any of the 10 wireless pendants / wristbands, it will trigger the GSM panic alarm box and cause it to send out immediate SMS alert to authorised users and also to activate its siren/rotating light.

 

Download TMAS Shipyard Emergency Alarm Solution Case Study

               Safety Matters Article June 2009

 

 gsm_alarm_box_with_wireless_pendant_wristband.jpg

 

 
Home | Solutions | Products | Support | Partners | News | About Us | Contact Us
Copyrights © 2001-2008 TCAM Technology Pte Ltd. All Rights Reserved | Privacy Policy | Term of Use
Call Us Now at +65-67461930 or Skype @ tcamtechnology or Email Us Now